Wilson DataPro M2M Signal Booster

Cellular Signal Booster for M2M Installations

The Wilson Electronics DataPro™ Direct Connect is Wilson's first cellular signal booster developed specifically for Machine to Machine (M2M) installations. This cellular amplifier direct connect configuration is based on the same field tested, market-proven technology that powers Wilson’s Sleek in-vehicle cell phone signal booster for the consumer market. The dual-band DataPro™ is ready to integrate with CDMA modem installations to provide strong, reliable cellular signal that ensures successful M2M data transfer.

The Wilson DataPro™ works on all North American CDMA networks. The DataPro’s compact form factor and low price make it an ideal component for M2M installations in weak signal environments. Integrators and OEMs can pair the DataPro™ with a variety of expertly designed Wilson Electronics cellular antennas for maximum system gain to overcome a weak signal. Weak signals can be caused many things, but the two main reasons are distance to the cell site, or obstructions such as brick, steel, trees or hills. The DataPro™ also incorporates power control logic that ensures maximum output power is within cellular network standards and will not interfere with a cellular network.

DataPro™ Features

• Bi-directional cellular signal booster amplifies signal to and from cell site
• Works with CDMA networks
• FCC type accepted, Industry Canada certificated (In process)
• Configurable to fit virtually any M2M installation 

DataPro™ User Benefits

• Boosts both signal coming from the cell site, and the signal going back
• Strong, reliable cell signal even in remote locations or other weak signal areas
• Less resending of data due to poor connection means faster data transfers
• Compatible with all North American CDMA cellular technologies
• Great For Remote Monitoring
• Great For Fleet Monitoring

With availability of the DataPro™, OEMs can source a compact, powerful and highly compatible signal booster ready to deploy with their products. Integrators can more easily custom design M2M communication systems that fi t tightly constrained spaces. The DataPro™ provides the signal boosting performance needed to ensure data transfer to and from weak signal areas. Juniper Research has forecast the number of wireless M2M devices will grow to 412 million by 2014. Wilson is the only manufacturer specifically designing cellular signal boosters for M2M installations.

DataPro Specifications

• Part Number: 811225
• Connectors: SMA Female
• Impedance (input/ output): 50 ohms
• Dimensions: 3.3 x 1.9 x .8 inch (8.4 x 4.8 x 2.0 cm)
• Frequency: 824-894 MHz / 1850-1990 MHz
• Gain: 12dB Nominal Power output (up link): CDMA 28.9dBm (800 MHz), 31.8dBm (1900 MHz)
• Noise Figure (typical): 3 dB nominal
• Isolation: >40 dB
• Power Requirements: 5V DC, 1A
• Install Guide