Cellular Phone Antennas
Cellular Phone Power Boosters Wireless Extenders
A power cell booster or amplifier for your cell phone can help increase your service providers signal strength which could increase your range, improve sound quality with less noise and reduce dropped calls. You can connect a cell phone signal booster directly to your phone or use an Amplifier / Repeater which requires no connection. We have cell phone antenna boosters, amplifiers, repeaters and power Boosters that will work with most Sony Ericsson, Kyocera, LG, HTC, Motorola, Nextel, Nokia, Panasonic, Samsung, Sanyo, Siemens and other cellular phones.
Important Note: For best performance, choose a cell booster that connects directly to your phone. To amplify several phones in a building or vehicle, choose the Wilson Amplifier / Repeater which does not require a direct connection to your phone.
Wilson Direct Connect Cell Phone Signal Booster
The Wilson
Cellular Direct Connect connects directly to your cell phone or PC Card via an external antenna adapter. It
can increase coverage up to 50 miles with up to 3 watts of power.
Available for 800MHz AMPS, Nextel/IDen and Dual Band (800MHz &
1900MHz) frequencies including wireless broadband services like EDGE/GPRS, EV-DO, HSDPA/ UMTS.
More About Wilson Direct Connect
Wilson SignalBoost DualBand Universal Booster
The Wilson
SignalBoost connects directly to your phone or PC Card using a velcro patch instead of an external antenna adapter. Use the Wilson SignalBoost when a cell phone antenna booster adapter is not available for your cell phone or PC Card. It can increase coverage up to 15 times over your wireless device's fixed antenna. The Wilson SignalBoost™ works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers (except iDen, Nextel) frequencies including wireless broadband services like EDGE/GPRS, EV-DO, HSDPA/ UMTS.
More About Wilson SignalBoost Universal Cellular Power Booster
Wilson Bi-Directional Amplifier / Repeater
The Wilson bi-directional cellular amplifier / repeater greatly improves signal strength inside a building. It does this without physical connection to your phone allowing you to walk around freely during a call. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cellular phones. The signal is received by an outside antenna, amplified with the cell booster, then repeated to an inside antenna where it is picked up by your cell phone. The cellular amplifier / repeater is usually used in locations where your cellular signal is strong outside a building or vehicle but weak inside the building. It's used where the signal is being blocked by the building walls or roof. If your signal is weak outside of your building, consider a cell phone signal booster or antenna that connects directly to your phone for better results. Available for 800MHz AMPS and Nextel/iDen frequencies.
More About Wilson Amplifier Information
Wilson SignalBoost Desktop Amplifier / Repeater
When installed properly, the SignalBoost DT will significantly reduce dropped calls and improve both voice and data signal quality.
Wilson SignalBoost DT Amplifier works by picking up a stronger signal from an antenna mounted on a pole or wall outside your building or high on a window inside your building, facing the cell site. The amplifier then increases the signal and transmits it through the onboard antenna on the amplifier to your cell phone or laptop data card.
The SignalBoost DT works with two antennas (included). The onboard antenna communicates with your cell phone or laptop data card, and the cradle antenna communicates with the cell tower. The cradle antenna is designed for installation outside on a wall or a pole, or inside on a window or wall, depending on your preferred configuration
More About Wilson SignalBoost Desktop Information