Wilson Trucker Antenna
The Engineers who created the Wilson Trucker C.B. Antenna have designed a cellular antenna that connects directly to your cellphone with an external antenna adapter. No other manufacturers cellular antenna comes close to the performance of the Wilson Trucker Cellular Antenna, both on 800 and 1900 MHz (Digital or Analog).
Wilson Trucker Cell Phone Antenna
Up to 90% of cell phone signal on both transmit and receive is absorbed within the vehicle body and the user's head. Wilson solves this problem by channeling all the power from the cellphone to the outside antenna. This results in the Wilson Cellular Trucker Antenna transmitting and receiving over 10 times more signal (10-15 db Gain) than a cellphone used inside the vehicle without an outside antenna.
Dual Band 800 & 1900 MHz Analog & Digital
The Wilson Dual Band Cellular Trucker Antenna was carefully designed to minimize loss and maximize gain on both 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency and low losses and will get the most signal to your cellular phone. Thanks to those innovations and attention to detail, Wilson Electronics has the best performing dual band trucker cell phone antenna available.
Wilson Trucker Cellular Antenna
Wilson's most popular model. Mounts on a standard 3/8"-24 thread female mount and includes 12 feet of RG-58 low loss coax cable with FME Female Nipple connector. Total length is 32 inches. Works in homes and on trucks, buses, boats, etc.
It's innovative design allows the Trucker Mirror Mount to be mounted on any surface - Metal, Fiberglass, Wood, etc. This means it will have excellent performance on the new fiberglass body trucks as well as the standard metal body trucks.
The antenna is also designed with an elevated feed system so that the antenna can get as high as possible to maximize signal strength.Learn More
Wilson RV Trucker Cellular Antenna
The included mounting hardware is designed to span roofs with large gaps such as the attics found in most Recreational Vehicles (RV's).
For installation through roofs without an attic, we provide instructions on cutting the 5/8" by 7" threaded rod. The threaded rod is brass and cuts easily.
Antenna extends 17.5 inches above the roof line. And features a spring to reduce impact damage.
Because of it's innovative design the Recreational Vehicle Trucker can be mounted on any surface - Metal, Fiberglass, Wood, Etc.
You can expect excellent performance on RV's, Trucks, Cars, Boats, Homes or almost any other application.
Includes 13.5 feet of RG-58 low loss coax cable and FME Female connector. Antenna whip now has spring base to absorb some impact without breaking. An External Antenna Adapter is requied to connect directly to your phone.Learn More
Wilson Trucker Spring-Mount Cellular Antenna
The Wilson Trucker Mobile Phone Antenna with spring base. Works great on trucks, RV’s, cars, boats, homes, or almost any other application. The built-in ground plane allows for use on any surface - metal, fiberglass, wood, etc. Fits standard 3/8 inch x 24 threaded mount.
The Wilson Cellular Trucker Antenna features a spring base and includes 13.5 feet of RG-58 low loss coax cable with FME Female Nipple connector. Total length is 21.5 inches.Learn More
Wilson Trucker antenna. NMO (Hole) mount. Antenna whip only. Cable and NMO base required and sold seperately.
The NMO Hole Mount Trucker works with any standard NMO mount. These mounts are very popular in the commercial sector.
Must be mounted on a metal surface.
The roof mounts must be mounted on the roof or any other flat metal surface and require that a hole be drilled through the vehicle.
The lip mounts must also be on a metal surface but they don't require any drilling - instead, they mount to the edge of the trunk, hood, etc.Learn More