Wilson NMO Hole Mount Antennas
Wilson Dual Band NMO Mount Antenna
The Wilson NMO Mobile Phone Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone. Thanks to these innovations and our attention to detail Wilson Electronics has the best performing NMO hole mount cellular antenna available. IMPORTANT The Wilson NMO Cellular Antenna requires a standard NMO mount (sold separately). Most NMO mounts are installed by drilling a hole in the roof of your vehicle. The cable is then routed under the headliner to the cell phone's location. This provides for an excellent ground plane and very solid permanent installation.
Wilson Trucker antenna. NMO (Hole) mount. Antenna whip only. Cable and NMO base required and sold seperately.
The NMO Hole Mount Trucker works with any standard NMO mount. These mounts are very popular in the commercial sector.
Must be mounted on a metal surface.
The roof mounts must be mounted on the roof or any other flat metal surface and require that a hole be drilled through the vehicle.
The lip mounts must also be on a metal surface but they don't require any drilling - instead, they mount to the edge of the trunk, hood, etc.Learn More