Wilson Antennas

Wilson RV Trucker Cellular Antenna

The included mounting hardware is designed to span roofs with large gaps such as the attics found in most Recreational Vehicles (RV's).

For installation through roofs without an attic, we provide instructions on cutting the 5/8" by 7" threaded rod. The threaded rod is brass and cuts easily.

Antenna extends 17.5 inches above the roof line. And features a spring to reduce impact damage.

Because of it's innovative design the Recreational Vehicle Trucker can be mounted on any surface - Metal, Fiberglass, Wood, Etc.

You can expect excellent performance on RV's, Trucks, Cars, Boats, Homes or almost any other application.

Includes 13.5 feet of RG-58 low loss coax cable and FME Female connector. Antenna whip now has spring base to absorb some impact without breaking. An External Antenna Adapter is requied to connect directly to your phone.

Wilson Trucker Spring-Mount Cellular Antenna

The Wilson Trucker Mobile Phone Antenna with spring base. Works great on trucks, RV’s, cars, boats, homes, or almost any other application. The built-in ground plane allows for use on any surface - metal, fiberglass, wood, etc. Fits standard 3/8 inch x 24 threaded mount.

The Wilson Cellular Trucker Antenna features a spring base and includes 13.5 feet of RG-58 low loss coax cable with FME Female Nipple connector. Total length is 21.5 inches.

Wilson's most popular cellular antenna. Comes with Wilson Trucker antenna and 3 Way Mount.

Wilson Trucker antenna. NMO (Hole) mount. Antenna whip only. Cable and NMO base required and sold seperately.

The NMO Hole Mount Trucker works with any standard NMO mount. These mounts are very popular in the commercial sector.

Must be mounted on a metal surface.

The roof mounts must be mounted on the roof or any other flat metal surface and require that a hole be drilled through the vehicle.

The lip mounts must also be on a metal surface but they don't require any drilling - instead, they mount to the edge of the trunk, hood, etc.

Wilson Outdoor Panel Antenna 75ohm - For use as an outside antenna for building cellular signal boosters. Comes with F Female connector. Additional Cable required but not included. 304473

Panel Antenna upgrade kit for Wilson SignalBoost DeskTop system. Comes with Panel Antenna with mounting plate, 20 foot RG-58 Coax Cable. (Wilson SignalBoost DT NOT Included)

Wilson Electronics Mini Dual Band Antenna with of 10ft RG-174 cable and SMA Male connector. 301126

Verizon 4G LTE In Building Signal Booster from Wilson Electronics. Tri-Band. Boosts Verizon 4G LTE signal as well as 800MHz and 1900MHz. 805165. * Amplifier Only - Requires 1 Inside Antenna, 1 Outside Antenna and cable (Not Included). Lightning Surge Protector highly recommended.

AG Pro Quint 5 Band Selectable In Building Signal Booster from Wilson Electronics. Designed for professional installation. Boosts Cellular 800MHz, PCS 1900MHz, AWS 1700/2100MHz as well as Either Verizon 4G LTE 700MHz OR AT&T 4G 700MHz signal. NOTE: Verizon 4G 700MHz and AT&T 4G 700MHz are user selectable and cannot be used at the same time. * Amplifier Only - Requires 1 Inside Antenna, 1 Outside Antenna and cable (Not Included). Lightning Surge Protector highly recommended.

AT&T 4G LTE In Building Signal Booster from Wilson Electronics. Tri-Band. Boosts AT&T 4G LTE 700MHz signal as well as 800MHz and 1900MHz. 805370. * Amplifier Only - Requires 1 Inside Antenna, 1 Outside Antenna and cable (Not Included). Lightning Surge Protector highly recommended.

In Building Signal Booster delivers stronger 4G signals as well as legacy voice and data services on 800 MHz, 1900 MHz and Advanced Wireless Services (AWS) 1700/2100 MHz frequencies. These frequency bands are used by all cell service providers in Canada, as well as T-Mobile USA. * Amplifier Only - Requires 1 Inside Antenna, 1 Outside Antenna and cable (Not Included). Lightning Surge Protector highly recommended. 802770

Wilson Electronics SIGNALBOOST™ DT Multi-Band Outside Cradle Antenna with mounting hardware. 301141.

Wilson Trucker Cellular Antenna

Wilson's most popular model. Mounts on a standard 3/8"-24 thread female mount and includes 12 feet of RG-58 low loss coax cable with FME Female Nipple connector. Total length is 32 inches. Works in homes and on trucks, buses, boats, etc.

It's innovative design allows the Trucker Mirror Mount to be mounted on any surface - Metal, Fiberglass, Wood, etc. This means it will have excellent performance on the new fiberglass body trucks as well as the standard metal body trucks.

The antenna is also designed with an elevated feed system so that the antenna can get as high as possible to maximize signal strength.

Wilson's cell phone cradle with built in antenna. Use with a powered cellular amplifier such as Wilson's SignalBooost Universal or Mobile Wireless Vehicle Amplifiers. Enables you to place your cell phone in a convenient location in your vehicle and use it with a hands free device such as a wired or Bluetooth headset or other Bluetooth hands-free device. Requires powered signal booster to boost signal (not included).

Wilson Building Mount Cellular Antenna

Wilson 75 ohm Building Mount Cellular Antenna

Wilson 75 ohm building mount cellular antenna made for use with the Wilson DB Pro cellular amplifier.

Wilson Marine Cellular Antenna

Wilson Marine Cell Phone Antenna. Improve Cellular Reception on Boats, Cabin Cruisers and Yachts. Has 7 inches of RG-58 Cable with FME Female connector attached.

Wilson 1900MHz Yagi Antenna

High gain directional Yagi pole mount antenna. The Wilson 14dbi 1900MHz Yagi cellular antenna is a very effective way to increase your cell phone's signal strength in rural areas.

Wilson 10dbi Yagi Cellular Antenna

High gain directional Yagi antenna. The Wilson 10dbi Yagi Cellular Antenna is a very effective way to increase your cell phone's signal strength in rural areas.

Wilson Wide Band Log Periodic Directional Antenna - 50 ohm. Frequency Range: 700-2500MHz.

Wilson Wide Band Log Periodic Directional Antenna - 75 ohm (for RG-6 Cable Installations). Frequency Range: 700-2500MHz.

Wilson Yagi Antenna.

Wilson Yagi Cellular Antennas are very effective at increasing your cell phone's signal strength in rural areas. The Yagi is a directional antenna and should be mounted above tree lines and pointed directly to your service providers nearest cell tower. 13dbi - 700-800MHz, 824-894MHz and 880-960MHz.

Wilson Dome Antenna Dual Band

Interior ceiling mount antenna for building cellular repeater systems. Vertically Polarity dual band antenna with N Female Connector.

Wilson Dome Antenna

Dual Band, Dual Polarity, Ceiling Mount. Use as interior antenna for building cellular repeater systems.

Wilson 75 ohm Dome Cellular Antenna

Wilson Dome Antenna is a directional inside antenna made to be mounted on the ceiling and can be used as the interior antenna with Wilson 75 ohm cellular repeater systems such as the Wilson SignalBoost DB Pro Cellular 75ohm Amplifier.

Wilson Glass Mount Cellular Antenna

Wilson glass mount is mounted using 3M adhesive. The whip with antenna base is mounted outside the vehicle glass and the mount with cable attached is mounted directly opposite on the inside of the vehicle glass.

Wilson Glass Mount Cellular Antenna

Wilson glass mount is mounted using 3M adhesive. The whip with antenna base is mounted outside the vehicle glass and the mount with cable attached is mounted directly opposite on the inside of the vehicle glass. Comes with SMA Male screw on adapter.

Wilson Mini Dual Band Glass Mount Antenna

Wilson Low Profile Glass Mount Antenna whip is 5.375 tall and includes 14 feet of RG-58 low loss coax cable with FME Female connector.

Wilson Magnetic Mount Cellular Antenna w/ FME Female Connector. Antenna is about 12 inches tall and includes a small magnetic base. It comes with 10 feet of RG-174U (thin) coax cable with FME Female connector. (301103)

Wilson Mini Dual Band magnetic mount antenna. The Wilson Mini Magnet Cellular Antenna is carefully designed to minimize loss and maximize gain. Magnetic Mount / 4" Tall, 10ft RG-174 cable, FME Female connector.

Wilson Dual Band Magnetic Mount Antenna with SMA Male Connector. 800/1900MHz Range dual band antenna with magnetic base. Height: 11.5 Antenna Gain: 3dbd / 5.12dBi in 806 - 894 MHz and 6.12dBi in 1850 - 1990 MHz Cable Length: 10ft

Wilson GSM Bands 900/1800/2100MHz Magnetic Mount Antenna

European/US GSM frequencies (900 MHz, 1800MHz and 2100MHz) magnetic mount antenna with one open and one closed coil.

Wilson Panel Antenna 50ohm - Window Mount Typically mounted in the interior of a building to a window and pointed outside, towards the nearest tower. Suction cups stick to window. Comes with N Female connector.

Wilson Panel Antenna - Wall Mount 301135. Wilson 50 Ohm Panel Dual Band Antenna is a directional antenna and is the perfect solution for those wanting a fixed base installation interior wall mount antenna to use with building amplifier systems. Comes with N Female Connector.

Wilson Outdoor Panel Antenna 50ohm - For use as an outside antenna for building cellular signal boosters. Comes with N Female connector. Additional Cable required but not included. 304453

Wilson Panel Antenna - Ceiling Mount. 304451. Wilson 50 Ohm Panel Dual Band Antenna is a directional antenna and is the perfect solution for those wanting a fixed base installation interior wall mount antenna to use with building amplifier systems. Comes with N Female Connector.

This antenna is no longer available and replaced by 304447 Wilson Panel Upgrade Kit.

Wilson Directional Desktop Antenna. Enables you to focus amplified signal in one direction.

Wilson NMO (Hole) Mount Antenna

Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone. Requires NMO Antenna Mount and cable Not Included

Wilson Tri-Band NMO Mount Nextel Antenna

NMO (Hole) mount antenna for Sprint/Nextel, BoostMobile, Telus-Mike (Canada) iDen networks specially tuned to the 800MHz iDen frequency.

Inside NMO Mount and Cable not included.

Wilson Ultra Slim Antenna

Wilson Ultra Slim universal patch antenna connector that comes packaged with the Wilson SignalBoost Universal Amplifier.

Wilson Ultra Slim universal patch antenna connector similar to what comes packaged with the Wilson SignalBoost Universal Amplifier, but with a SMA M connector instead of the usual FME F.

Wilson Slim Low Profile Cellular Antenna

Use as an external antenna, with a building repeater system or vehicle repeater system.