Wilson AG Pro 75 Signal Booster
The Wilson Electronics AG Pro 75 cellular amplifier is a dual-band, installer-friendly booster designed to provide a strong cellular signal inside a building. The AG Pro 75 building cellular amplifier delivers a maximum gain of 75dB at 1900 MHz and 70dB at 800 MHz. The product includes Wilson’s patented oscillation and cell site overload protection, and proximity detection technologies to prevent interference on the cellular network. It works with all cellular devices on all North American service provider networks (except Nextel/iDEN).
AG Pro 75 Features
- Adjustable gain control for optimal gain at almost any location
- Bidirectional amplifier boosts signal to and from cell site
- Boosts 800MHz and 1900MHz Cellular Frequencies
- Configurable with a variety of Wilson cellular antennas to fit virtually any building installation
This signal booster requires a moderate strength signal outside, where you mount the outside antenna. It amplifies commonly found 800MHz and 1900MHz cellular signal frequencies for both 2G and 3G. The stronger that signal, the more coverage area will be boosted inside the building. This amplifier will provide little or no coverage inside a building if the building is located in an area where the outside signal strength is weak or non existent. Outside signal strength and other factors including service provider frequency, cable length, antennas and amplifier contribute to the amount of coverage area inside a building. We can help you estimate improved cellular coverage area using our different cell phone repeaters inside a building with a few key pieces of information. Read our Estimating Coverage Area page, gather information then give us a call or use our online contact form.
More Information/Specs : Wilson AG Pro 75 Building Amplifier
As low as: $917.52
Build a custom building cellular booster kit.
- - Wilson AG Pro 75 Amplifier or AG Pro Installer
- - Inside Antenna and Cable
- - Outside Antenna and Cable
- - Additional cables and accessories if required
In building cellular signal repeater amplifier. DualBand (800/1900MHz). Gain: 70db - 800MHz and 75db 1900MHz - Comes with Amplifier and AC/DC wall transformer. Requires cable, one inside and one outside antenna (not included). 801280Learn More
Adjust separate Uplink and Downlink gain. Wilson Electronics AG Pro Installer is a dual band indoor booster designed for professional installation in large buildings. The adjustable gain controls on this booster allow the installer to set separately the uplink gain and downlink gain on both the 800 MHz and the 1900 MHz.Learn More