Coaxial Cable Connectors

RG-58 Coax Cable Crimp On Connectors

These RG-58 Crimp on coax connectors require an RG-58 size crimping tool.

	TNC Male Crimp On Connector - $3.50 ADD TO CART For RG-58 cable
	Mini-UHF Male Crimp On Connector - $3.50 ADD TO CART For RG-58 cable
	FME Female Nipple Crimp On Connector - $3.50 ADD TO CART For RG-58 cable
	FME Male Crimp On Connector - $4.50 ADD TO CART For RG-58 cable
	"N" Male Crimp for RG58 - $6.95 ADD TO CART
	SMA Male Crimp-On RG58 - $5.95 ADD TO CART

RG-8X Coax Cable Crimp On Connectors
These RG-8x Crimp on coax connectors require an RG-8x size crimping tool.

	TNC Male - $4.95 ADD TO CART For RG-8X cable
.	TNC Female - $3.50 ADD TO CART For RG-8X cable
	Mini-UHF Male - $3.50 ADD TO CART For RG-8X cable
	FME Female Nipple - $3.50 ADD TO CART For RG-8X cable
	FME Male - $3.50 ADD TO CART For RG-8X cable
	"N" Male Crimp for RG-8x - $6.95 ADD TO CART

Wilson 9913 / LMR-400 / Wilson400 Coax Cable Crimp On Connectors

"N" male Crimp for Wilson 9913 or Wilson400 LMR-440 equiv - $8.95 ADD TO CART

ANTENNA COAXIAL CABLE We offer a variety of cellular antenna cable extensions including Wilson 9913 Equivalent, Wilson400 (LMR-400 Equivalent), RG-8, RG-58 and 174. Please remember that adding cable length and additional connectors/adapters to an antenna will reduce the signal strength to the phone. For example, with RG-58 cable you can estimate about .16db loss per foot and .1db loss per connector. For longer lengths choose RG-8x, Wilson400, or Wilson's 9913 cable. Wilson's 9913 & Wilson400 coax cable is the lowest loss coax we carry.

A - 9913 Cable B - RG-58 Cable C - 174 Cable

9 ft. RG-58 Coax Cable Extension TNC M / TNC F
$9.95
with TNC Male at one end and TNC Female at the other.

33 ft. RG-8X Coax Cable Extension TNC M / TNC M
$29.95
33 feet of low loss RG-8X Cable with TNC Male connector at both ends. Black

50 ft. RG-8X Coax Cable Extension TNC M / TNC M
$39.95
50 feet of low loss RG-8X Cable with TNC Male connector at both ends. Black

30 ft. LMR-240 Low Loss Coaxial Cable FME M / FME F
$39.95
30 feet of LMR-240 coax cable with FME Male on one end and FME Female on the other. Less than 1/4" diameter with solid inner conductor. Attenuation: .071db loss per foot @800mhz. Use for higher gain, directional antennas.

Wilson Electronics Antenna Coax Cables

Wilson Recommendations

Wilson makes a very good, low loss coax cable for their antennas as well as any other cell phone antenna. Please remember that there is some loss when you add an extension. As far as length, their recommendations are:

• 5' and 10' cables can be used with 3db or higher antennas
• 5, 10 or 15' cables can be used with Trucker Mirror Mount Antenna
• For lengths longer than 20', Wilson 400 coax cables are recommended (see below).
  

Wilson RG-58 Low Loss Foam Coax Cables FME M / FME F

These Wilson cables have an FME Female on one end and an FME Male connector on the other. These cables work great with Wilson Antennas or any other antenna.

• 5 Foot Extension - .6 db loss (AB951101) - $9.95 ADD TO CART
• 10 Foot Extension - 1.2 db loss (AB951102) - $11.95 ADD TO CART
• 15 Foot Extension - 1.8 db loss (AB951103) - $18.95 ADD TO CART

Wilson RG-58 Coax Cable with N Male & FME F Connectors

Wilson 2 ft. RG-58 "N" Male / FME F
$11.95
Wilson 2 Foot RG-58 extension coax cable with N male on one end and FME Female on the other. 24 db loss. Made for Wilson Yagi Antennas. AB951110

Wilson 10 ft. RG-58 "N" Male / FME F
$14.95
Wilson 10 Foot RG-58 extension coax cable with N male on one end and FME Female on the other. 1.2 db loss. Made for Wilson Yagi Antennas. AB951120

Wilson 20 ft. RG-58 "N" Male / FME F
$22.95
Wilson 20 Foot RG-58 extension coax cable with N male on one end and FME Female on the other. 2.4 db loss. Made for Wilson Yagi Antennas. AB951104

Wilson LMR-400 Equivalent Ultra Low Loss Cable
For Wilson Antennas and Amplifier Systems

Wilson 400 (LMR-400 equivalent) coax cable is lighter (less expensive to ship) and more flexible than the Wilson 9913 cable while having close to the same loss. Better water resistance for outdoors (foam core). Available in 2', 20', 30', 50', 75', 100' lengths. Comes with N Male coax connectors crimped to each end.

These cables are recommended for Wilson's Yagi antennas and Wilson Building cellular repeater systems.

• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 2 Feet $18.95 ADD TO CART
• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 10 Feet $27.95 ADD TO CART
• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 20 Feet $39.95 ADD TO CART
• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 30 Feet $49.95 ADD TO CART
• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 50 Feet $59.95 ADD TO CART
• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 75 Feet $84.95 ADD TO CART
• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 100 Feet $99.95 ADD TO CART
• Wilson LMR-400 Equivalent Ultra Low Loss Coax Cable 500 Feet (no connectors) $449.95 ADD TO CART

RG-6 Coax Cable Quad Shield 75 ohm

RG-6 coax cables for 75ohm antennas and amplifiers. This high quality RG6 coax cable is quad shielded and 75 ohm and comes with an F Male connector on each end. Can also be used for cable or satellite TV applications. Important: Use this cable with 75 ohm amplifiers and antennas only. Use with Wilson SignalBoost DT or Wilson DB Pro repeater systems and 75 ohm antennas. Do not use with 50 ohm amplifiers or antennas.

• 2' RG-6 Coax - $5.95 - White - 950602 ADD TO CART
• 20' RG-6 Coax - $9.95 - White - 950620 ADD TO CART
• 30' RG-6 Coax - $14.95 - White - 950630 ADD TO CART
• 50' RG-6 Coax - $19.95 - White - 950650 ADD TO CART

Wilson Splitters

Wilson 2 Way Antenna Splitter 700MHz - 2300MHz - N Connectors

Price: $74.95

The Wilson 2 Way Splitter allows you to connect 2 internal antennas to the Bi-Directional Amplifier. Note that the signal will be split in half between the antennas. The ends on the splitter are all "N" type female so antenna cable require "N" type male connectors or adapters. Can be used with 800MHz or 1900MHz systems. Range 700MHz to 2300MHz. 859957 Larger Picture

Wilson 2 Way Antenna Splitter 700MHz - 2300MHz - F Connectors

Price: $74.95

The Wilson 2 Way Splitter allows you to connect 2 internal antennas to the Bi-Directional Amplifier. Note that the signal will be split in half between the antennas. The ends on the splitter are all "F" type female so antenna cable require "F" type male connectors or adapters commonly used with RG-6 cable. Can be used with 800MHz or 1900MHz systems. Range 700MHz to 2300MHz. 859959

Lightning Surge Protector

Wilson's Surge Protectors are gas surge arresters designed to protect sensitive electronic equipment such as a power booster or repeater system from damage due to excess voltage for currents generated by transient phenomena (lightning or static build-up).

• N-Female Connectors
• Weather-proof
• Attenuation <0.2 dB
• Frequency range up to 3 GHz
• Replaceable gas discharge element
• More Information

Price: $74.95
Use 2 foot Wilson 9913-Equivalent or Wilson400 (above) coax cable to tie in surge protector to your setup.

COAX CABLE CONNECTOR TOOLS

Cable Cutter
$9.95
Cut "thick.
Please note: Tools are non returnable except for defective replacement.

Coax Connector Crimping Tool
$29.95
Professional RG type coax cable ratchet hex tool for F, BNC, TNC, N, Teflon, Thinnet-PVC and Fiber Optic Connectors. Frame made by carbon steel, harden and finished by black oxide and with PE grips. Sizes .256" (6.5mm), .213" (5.41mm) and .068" (1.72mm). Crimps RG 58, 59, 62, 140, 210, 55, 141, 142, 223, 303, 400, Belden 8279, fiber optic.
Please note: Tools are non returnable except for defective replacement.

Coax Cable Stripper
$14.95
Rotary coaxial cable stripper for RG-58, RG-59 and RG-62 coaxial cables. Strip lengths of 6mm or 8mm.
Please note: Tools are non returnable except for defective replacement.